True Asset

Lucas / CAV sandwich type filter

Single head

Flow direction at ports is indicated for agglomerator flow. This head is suitable for filter flow by directing flow against the direction indicated.

• Two M14x1.5 threaded inlet ports
• Two M14x1.5 threaded outlet ports
• One M10x1.5 threaded bleed port

Filter head

 

M14 banjo bolt

 

M14 banjo with 8mm barb suitable for hose or nylon pipe

M14 banjo with 10mm barb suitable for hose or nylon pipe

M14 blanking plug - to be used with a sealing washer

M14 sealing washers - two required for each banjo connection

M10 Restricted orifice bleed bolt w/banjo suitable for 8mm hose and sealing washers. This is suitable for applications where the filter is fed by a fuel lift pump

M10 Plug. This plug bolt is drilled to allow easy air bleeding when loosened.  Supplied with sealing washer.

Double head

Flow direction at ports is indicated for agglomerator flow. This head is suitable for filter flow by directing flow against the direction indicated.

• Two M14x1.5 threaded inlet ports

• Two M14x1.5 threaded outlet ports

• Three M10x1.5 threaded bleed port

Produced to flow through both filters in parallel

Filter head

 

M14 banjo bolt

 

M14 banjo with 8mm barb suitable for hose or nylon pipe

M14 banjo with 10mm barb suitable for hose or nylon pipe

M14 blanking plug - to be used with a sealing washer

M14 sealing washers - two required for each banjo connection

M10 Restricted orifice bleed bolt w/banjo suitable for 8mm hose and sealing washers. This is suitable for applications where the filter is fed by a fuel lift pump

M10 Plug. This plug bolt is drilled to allow easy air bleeding when loosened. Supplied with sealing washer.

Fuel filters

Small and large filters with set of four seals for top and bottom of filter, top centre of filter, and under head of centre bolt.

Delphi 296 fuel filter w/ seals

Upgrade kit

Upgrade from small filter to lagre filter. FIlter with full set of seals and a suitably sized centre bolt extender.

296 to 796 conversion kit - 796 filter with centre bolt extension

 

Water separator / sedimentor unit

Cast aluminium unit the same height as a 296 filter. It should be noted that this is longer than the standard CAV unit giving a larger capacity.

Water separater / sedimentor unit

---